Ab einen Bestellwert von 240,- &eur; berechnen wir keine Versandkosten innerhalb von Deutschland (außer bei scharfen Waffen).
Alle Preise verstehen sich incl. MwSt.
Für Lieferungen nach Österreich gelten pauschal Versandkosten von 15,- &eur;

Tuning » Abzug 1 2 29 Artikel

Features:
• Very Short Trigger Reset
• Custom Aluminum Fulcrum Trigger w/Polished Trigger Bar
• Skeletonized Stainless Steel Striker
• V3 Race Connector
• Titanium Safety Plunger
• Custom Springs
• Ejector Housing
• Adjustable Pre-Travel & Over-Travel
• Trigger Pull Weight Adjustable from 2-6 lbs
Precise Letoff, Fast Rest, Fully-Adjustable For Takeup & Overtravel
Convenient kits with the performance benefits of a custom trigger job to give your Glock® an ultra-smooth pull, clean letoff, and short reset without impairing the reliability of the factory safeties. Fully adjustable for pre-travel and over-travel via two easy-to-access hex-head screws (wrench included), so you can tune trigger feel to your exact requirements for maximum control. Trigger shoe and trigger safety are precision machined from 6061 T6 aluminum billet for precise engagement, smooth movement, and superb responsiveness. Engagement surfaces on the stainless steel trigger bar are mirror polished for outstanding sensitivity and consistency. Basic Fulcrum trigger includes preassembled trigger shoe, safety lever, and trigger bar. Gen 4 Kits available for Gen 4 models 17/19 (9mm) and 22/23 (.40 S&W) pistols. ZEV Technologies recommends this for competition use ONLY.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Hier ein BEISPIEL ! geliefert wird das was oben schwarz im Text steht...
Original Glock Abzug 2,7mm Reset Weg / 5,5mm Weg gesamt / dabei 0,7mm nach dem Auslösen / Gewicht 2,1kg
Glockworx Tactical 2,5mm Reset Weg / 5,0mm Weg gesamt / dabei 0,5mm nach dem Auslösen / Gewicht 1,6kg
Glockworx Fulcrum 2,2mm Reset Weg / 4,8mm Weg gesamt / dabei 0,4mm nach dem Auslösen / Gewicht 1,5kg
Für Gen 4
 :  
415,00 € (incl. Mwst. zzgl. Versand)
 

Precise Letoff, Fast Rest, Fully-Adjustable For Takeup & Overtravel; Drop-In Installation
Convenient kits combine easy drop-in installation with the performance benefits of a custom trigger job to give your Glock® an ultra-smooth pull, clean letoff, and short reset without impairing the reliability of the factory safeties. Fully adjustable for pre-travel and over-travel via two easy-to-access hex-head screws (wrench included), so you can tune trigger feel to your exact requirements for maximum control. Trigger shoe and trigger safety are precision machined from 6061 T6 aluminum billet for precise engagement, smooth movement, and superb responsiveness. Engagement surfaces on the stainless steel trigger bar are mirror polished for outstanding sensitivity and consistency. Basic Fulcrum trigger includes preassembled trigger shoe, safety lever, and trigger bar. Complete Trigger Kit contains the trigger, trigger bar, trigger block, ejector, connector, trigger spring, and a lightweight stainless steel firing pin safety plunger and spring to further refine the trigger pull. Comes with a reduced-power striker spring to produce a lighter-feeling trigger for competition, and the factory-weight striker spring for daily carry and duty use.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
SPECS: .45 DROP IN AND ULTIMATE ONLY FIT .45 ACP. IN GEN-1 THRU GEN-3 GUNS. 10mm uses a different firing pin safety diameter that can’t be used on a .45 nor can the .45 be used on the 10mm.
Hier ein BEISPIEL ! geliefert wird das was oben schwarz im Text steht...
Original Glock Abzug 2,7mm Reset Weg / 5,5mm Weg gesamt / dabei 0,7mm nach dem Auslösen / Gewicht 2,1kg
Glockworx Tactical 2,5mm Reset Weg / 5,0mm Weg gesamt / dabei 0,5mm nach dem Auslösen / Gewicht 1,6kg
Glockworx Fulcrum 2,2mm Reset Weg / 4,8mm Weg gesamt / dabei 0,4mm nach dem Auslösen / Gewicht 1,5kg
Bis Gen. 3
 :  
299,00 € (incl. Mwst. zzgl. Versand)
 

Precise Letoff, Fast Rest, Fully-Adjustable For Takeup & Overtravel; Drop-In Installation
Convenient kits combine easy drop-in installation with the performance benefits of a custom trigger job to give your Glock® an ultra-smooth pull, clean letoff, and short reset without impairing the reliability of the factory safeties. Fully adjustable for pre-travel and over-travel via two easy-to-access hex-head screws (wrench included), so you can tune trigger feel to your exact requirements for maximum control. Trigger shoe and trigger safety are precision machined from 6061 T6 aluminum billet for precise engagement, smooth movement, and superb responsiveness. Engagement surfaces on the stainless steel trigger bar are mirror polished for outstanding sensitivity and consistency. Basic Fulcrum trigger includes preassembled trigger shoe, safety lever, and trigger bar. Complete Trigger Kit contains the trigger, trigger bar, trigger block, ejector, connector, trigger spring, and a lightweight stainless steel firing pin safety plunger and spring to further refine the trigger pull. Comes with a reduced-power striker spring to produce a lighter-feeling trigger for competition, and the factory-weight striker spring for daily carry and duty use.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
SPECS: .45 DROP IN AND ULTIMATE ONLY FIT .45 ACP. IN GEN-1 THRU GEN-3 GUNS. 10mm uses a different firing pin safety diameter that can’t be used on a .45 nor can the .45 be used on the 10mm.
Hier ein BEISPIEL ! geliefert wird das was oben schwarz im Text steht...
Original Glock Abzug 2,7mm Reset Weg / 5,5mm Weg gesamt / dabei 0,7mm nach dem Auslösen / Gewicht 2,1kg
Glockworx Tactical 2,5mm Reset Weg / 5,0mm Weg gesamt / dabei 0,5mm nach dem Auslösen / Gewicht 1,6kg
Glockworx Fulcrum 2,2mm Reset Weg / 4,8mm Weg gesamt / dabei 0,4mm nach dem Auslösen / Gewicht 1,5kg
Bis Gen 3
 :  
299,00 € (incl. Mwst. zzgl. Versand)
 

Precise Letoff, Fast Rest, Fully-Adjustable For Takeup & Overtravel; Drop-In Installation
Convenient kits combine easy drop-in installation with the performance benefits of a custom trigger job to give your Glock® an ultra-smooth pull, clean letoff, and short reset without impairing the reliability of the factory safeties. Fully adjustable for pre-travel and over-travel via two easy-to-access hex-head screws (wrench included), so you can tune trigger feel to your exact requirements for maximum control. Trigger shoe and trigger safety are precision machined from 6061 T6 aluminum billet for precise engagement, smooth movement, and superb responsiveness. Engagement surfaces on the stainless steel trigger bar are mirror polished for outstanding sensitivity and consistency. Basic Fulcrum trigger includes preassembled trigger shoe, safety lever, and trigger bar. Complete Trigger Kit contains the trigger, trigger bar, trigger block, ejector, connector, trigger spring, and a lightweight stainless steel firing pin safety plunger and spring to further refine the trigger pull. Comes with a reduced-power striker spring to produce a lighter-feeling trigger for competition, and the factory-weight striker spring for daily carry and duty use.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
SPECS: .45 DROP IN AND ULTIMATE ONLY FIT .45 ACP. IN GEN-1 THRU GEN-3 GUNS. 10mm uses a different firing pin safety diameter that can’t be used on a .45 nor can the .45 be used on the 10mm.
Hier ein BEISPIEL ! geliefert wird das was oben schwarz im Text steht...
Original Glock Abzug 2,7mm Reset Weg / 5,5mm Weg gesamt / dabei 0,7mm nach dem Auslösen / Gewicht 2,1kg
Glockworx Tactical 2,5mm Reset Weg / 5,0mm Weg gesamt / dabei 0,5mm nach dem Auslösen / Gewicht 1,6kg
Glockworx Fulcrum 2,2mm Reset Weg / 4,8mm Weg gesamt / dabei 0,4mm nach dem Auslösen / Gewicht 1,5kg
Für Gen 4
 :  
299,00 € (incl. Mwst. zzgl. Versand)
 

Precise Letoff, Fast Rest, Fully-Adjustable For Takeup & Overtravel; Drop-In Installation
Convenient kits combine easy drop-in installation with the performance benefits of a custom trigger job to give your Glock® an ultra-smooth pull, clean letoff, and short reset without impairing the reliability of the factory safeties. Fully adjustable for pre-travel and over-travel via two easy-to-access hex-head screws (wrench included), so you can tune trigger feel to your exact requirements for maximum control. Trigger shoe and trigger safety are precision machined from 6061 T6 aluminum billet for precise engagement, smooth movement, and superb responsiveness. Engagement surfaces on the stainless steel trigger bar are mirror polished for outstanding sensitivity and consistency. Basic Fulcrum trigger includes preassembled trigger shoe, safety lever, and trigger bar. Gen 4 Kits available for Gen 4 models 17/19 (9mm) and 22/23 (.40 S&W) pistols.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Hier ein BEISPIEL ! geliefert wird das was oben schwarz im Text steht...
Original Glock Abzug 2,7mm Reset Weg / 5,5mm Weg gesamt / dabei 0,7mm nach dem Auslösen / Gewicht 2,1kg
Glockworx Tactical 2,5mm Reset Weg / 5,0mm Weg gesamt / dabei 0,5mm nach dem Auslösen / Gewicht 1,6kg
Glockworx Fulcrum 2,2mm Reset Weg / 4,8mm Weg gesamt / dabei 0,4mm nach dem Auslösen / Gewicht 1,5kg
Abbildung ähnlich
Für Gen 4
 :  
299,00 € (incl. Mwst. zzgl. Versand)
 

Precise Letoff, Fast Rest, Fully-Adjustable For Takeup & Overtravel; Drop-In Installation
Convenient kits combine easy drop-in installation with the performance benefits of a custom trigger job to give your Glock® an ultra-smooth pull, clean letoff, and short reset without impairing the reliability of the factory safeties. Fully adjustable for pre-travel and over-travel via two easy-to-access hex-head screws (wrench included), so you can tune trigger feel to your exact requirements for maximum control. Trigger shoe and trigger safety are precision machined from 6061 T6 aluminum billet for precise engagement, smooth movement, and superb responsiveness. Engagement surfaces on the stainless steel trigger bar are mirror polished for outstanding sensitivity and consistency. Basic Fulcrum trigger includes preassembled trigger shoe, safety lever, and trigger bar. Gen 4 Kits available for Gen 4 models 17/19 (9mm) and 22/23 (.40 S&W) pistols.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Hier ein BEISPIEL ! geliefert wird das was oben schwarz im Text steht...
Original Glock Abzug 2,7mm Reset Weg / 5,5mm Weg gesamt / dabei 0,7mm nach dem Auslösen / Gewicht 2,1kg
Glockworx Tactical 2,5mm Reset Weg / 5,0mm Weg gesamt / dabei 0,5mm nach dem Auslösen / Gewicht 1,6kg
Glockworx Fulcrum 2,2mm Reset Weg / 4,8mm Weg gesamt / dabei 0,4mm nach dem Auslösen / Gewicht 1,5kg
Abbildung ähnlich
Für Gen 4
 :  
299,00 € (incl. Mwst. zzgl. Versand)
 

The Apex Tactical Action Enhancement Trigger for Glock® is a direct drop-in replacement of the factory polymer trigger and reduces pre-travel, overall trigger travel, and trigger reset, provides a smooth uptake and reset while delivering a crisp trigger break. Expected Results: Direct drop-in replacement of factory polymer trigger Smooths uptake and reset Reduces trigger pre-travel, overall travel, and reset distance Crisp trigger break Center mounted pivoting safety maintains factory safety values Trigger Only works in nearly all current Glock® model pistols. The trigger is NOT designed to function in the narrower frame of the model 42. We also advise against use in the model 43 at this time. Not for use with a Gen 4 Trigger Bar. Trigger Only Requires use of customer’s stock Gen 3 trigger bar(and removal of factory trigger) or installation on separately purchased factory trigger bar (NOTE: removing the factory trigger from the trigger bar requires replacement of the complete assembly to go back to stock). Not for use with Gen 4 & 5 trigger bar.
Bis Gen 3
 :  
199,00 € (incl. Mwst. zzgl. Versand)
 

The Apex Tactical Action Enhancement Trigger for Glock® is a direct drop-in replacement of the factory polymer trigger and reduces pre-travel, overall trigger travel, and trigger reset, provides a smooth uptake and reset while delivering a crisp trigger break. Expected Results: Direct drop-in replacement of factory polymer trigger Smooths uptake and reset Reduces trigger pre-travel, overall travel, and reset distance Crisp trigger break Center mounted pivoting safety maintains factory safety values Trigger Only works in nearly all current Glock® model pistols. The trigger is NOT designed to function in the narrower frame of the model 42. We also advise against use in the model 43 at this time. Not for use with a Gen 4 Trigger Bar. Trigger Only Requires use of customer’s stock Gen 3 trigger bar(and removal of factory trigger) or installation on separately purchased factory trigger bar (NOTE: removing the factory trigger from the trigger bar requires replacement of the complete assembly to go back to stock). Not for use with Gen 4 & 5 trigger bar.
Bis Gen 3

 :  
129,00 € (incl. Mwst. zzgl. Versand)
 

Bitte das Modell mit angeben
Das kann separat im Textfeld, in der Bestellmaske, mit angegeben werden und wird von uns dann in die Bestellung mit übernommen.
ps. Wird bei der Bestellung kein Modell angegeben für was für eine Waffe die Teile sein sollen, schicken wir automatisch für die GLOCK 17 der 3. Generation!

Hier ein BEISPIEL ! geliefert wird das was oben schwarz im Text steht...
Original Glock Abzug 2,7mm Reset Weg / 5,5mm Weg gesamt / dabei 0,7mm nach dem Auslösen / Gewicht 2,1kg
Glockworx Tactical 2,5mm Reset Weg / 5,0mm Weg gesamt / dabei 0,5mm nach dem Auslösen / Gewicht 1,6kg
Glockworx Fulcrum 2,2mm Reset Weg / 4,8mm Weg gesamt / dabei 0,4mm nach dem Auslösen / Gewicht 1,5kg

ACHTUNG: Wird kein Modell bei der Bestellung angegeben, schicken wir automatisch für Glock 17!!!!!!!!!!!!!
 :  
49,00 € (incl. Mwst. zzgl. Versand)
 

Bitte das Modell mit angeben
Das kann separat im Textfeld, in der Bestellmaske, mit angegeben werden und wird von uns dann in die Bestellung mit übernommen.
ps. Wird bei der Bestellung kein Modell angegeben für was für eine Waffe die Teile sein sollen, schicken wir automatisch für die GLOCK 17 der 3. Generation!

Hier ein BEISPIEL ! geliefert wird das was oben schwarz im Text steht...
Original Glock Abzug 2,7mm Reset Weg / 5,5mm Weg gesamt / dabei 0,7mm nach dem Auslösen / Gewicht 2,1kg
Glockworx Tactical 2,5mm Reset Weg / 5,0mm Weg gesamt / dabei 0,5mm nach dem Auslösen / Gewicht 1,6kg
Glockworx Fulcrum 2,2mm Reset Weg / 4,8mm Weg gesamt / dabei 0,4mm nach dem Auslösen / Gewicht 1,5kg

ACHTUNG: Wird kein Modell bei der Bestellung angegeben, schicken wir automatisch für Glock 17!!!!!!!!!!!!!
 :  
24,00 € (incl. Mwst. zzgl. Versand)
 

Bitte das Modell mit angeben!
Das kann separat im Textfeld, in der Bestellmaske, mit angegeben werden und wird von uns dann in die Bestellung mit übernommen.
ps. Wird bei der Bestellung kein Modell angegeben für was für eine Waffe die Teile sein sollen, schicken wir automatisch für die GLOCK 17 der 3. Generation!
 :  
10,00 € (incl. Mwst. zzgl. Versand)
 

ZEV TECHNOLOGIES PRO CONNECTOR FOR GLOCK
 :  
25,00 € (incl. Mwst. zzgl. Versand)
 

Tuning » Abzug 1 2 29 Artikel

Wir können natürlich auch andere Produkte der hier aufgelisteten Herstellern beschaffen!!!